Yokogawa DAQWORX - Manual (Page 40)

2-20 IM WX101-01E
D. If necessary, click the “Ctrl. Ch” cell. The dialog box below appears. The “Ctrl. Ch”
cell is only available for CX models.
E. If necessary, set the “Extra. Ch” cell. The “Extra. Ch” cell is only available for DX2000
and MV2000 models with the /MC option.
• Setting DARWIN options and the subunit/module configuration
For DA100, DR130, DR200, and DC100 recorders, select expandable model or
standalone model and set the presence or absence of options and the subunit/module
configuration.
A. Under the “Recorder Setting” tab, click the “Standalone” or “Expandable” cell in the
“System” column. The “System Options” dialog box opens. Set the displayed items
according to the following procedure:
“Standalone” or “Expandable”: Select using the option (radio) button (“Standalone”
only for the DR130).
Style: Select from the drop-down list box.
Memory (for the DC100 only): Select from the drop-down list box.
Options: Select the appropriate check box.
Note
When making changes to the DARWIN series system, if the changes do not effect the system
configuration, do not initialize the system (see the next page). The Initialize button is only
active when initialization is needed. The OK button is displayed when initialization is not
needed.
2.6 Setting Communications and the Connected Recorder