Yokogawa DAQWORX - Manual (Page 163)

6-8 IM WX101-01E
• When set to User File
Creates a text file using the information of the items specified below. Also, records
the communication disconnect/recovery status for connection destinations to which
communication failed the first time.
Specify the output file name.
For details on this setting, see “PNG File” in the previous section.
Specify the delimiter for items in the file. If the check box is selected,
spaces are used to delimit the items in the file. If the check box is cleared,
tabs are used to delimit the items.
Specify the output of time information.
Specify the output of alarm information.
Specify the output of instantaneous values for each tag.
Specify an arbitrary string to be output.
Specify the output of recorder information.
Specify the tag or group to be output. Click the button
to display the selection dialog box. For details on the
settings, see the case when “Alarm” is specified in
“Setting Event Conditions.”
Specify the recorder that is to output the text file. Click
the button to display the recorder selection dialog box.
Select Recorder dialog box
Note
When the output file is Select File and a file with the same name already exists, the file is
overwritten at the time of execution.
6.1 Setting Events