Yokogawa DAQWORX - Manual (Page 429)

7-253 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
Setting One Computation Channel at a Time
1. Double-click the channel
to set to open the Channel
Settings dialog box
2. Click the tab of the item to be set.
Click here to enter
the operator.
3. After setting the items,
click here.
Set the maximum value.
Set the minimum value.
Copy the first setting.
[Select Operator] dialog box
Operator button
Select the operator type and click the operator button.
The items of the [Math] tab can be set for each channel. The items set here are the
same as the ones in the [Math] tab of the Hardware Configurator. For details, see the
page corresponding to the item.
7.10 Setting CX Series