Yokogawa DAQWORX - Manual (Page 168)

6-13 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Event Processor
• When set to Convert
Select the file to be converted. The files that can be converted are data files (.mld)
and report files (.rbi). Select “None,” “Target File,” or “Select File.”
• Selecting “Target File” specifies the file that was specified in the “Target File” page.
• Selecting “Select File” allows you to specify the file name. Enter the file name directly
in the text box or click “Select” to select the file from the “Select File” dialog box.
For details on the settings, see “PNG File.”
These check boxes are valid when Input File is set to “Data File.”
Select the check box and specify “Start” and “End.”
Pressing the button to the right of “Start” or “End” displays the Group Selection
dialog box or Tag Selection dialog box.
Click the desired group or tag. The dialog box closes and the selected group or
tag is applied.
Select the type of file to be converted
from “Text,” “Excel,” and “Lotus.”
Select the file to be converted from “Auto Name,” and “Select
File.” For details, see “PNG File.” When set to Auto Name,
the extension of the input file name changes according to
the type of conversion.
6.1 Setting Events