Yokogawa DAQWORX - Manual (Page 248)

7-72 IM WX101-01E
Action
The action to be executed when an event occurs.
Settings Description
Memory Start/Stop -
Memory Start -
Memory Stop -
Trigger
*2
Can be specified when the DX is configured to record event data.
AlarmACK Cannot be specified when the event is set to [Relay], [Switch], or
[Alarm].
Math Start/Stop Can be specified on /M1 and /PM1 options.
MathStart Can be specified on /M1 and /PM1 options.
MathStop Can be specified on /M1 and /PM1 options.
Math Reset Can be specified on /M1 and /PM1 options.
Save Display Data Can be specified when the DX is configured to record display data.
Save Event Data Can be specified when the DX is configured to record event data.
Message Set the message number and the destination. Set the message
destination to all groups (All) or a group number.
Snapshot -
Display Update Interval
Change Can be specified when the function for switching between the trend
update interval and the secondary update interval is enabled.
Manual Sample -
Timer Reset Cannot be specified when the event is set to [Timer].
Display Group Change Specify the number of the group to be displayed.
Flag Can be specified on /M1 and /PM1 options.
Time ADJUST Can be specified only when the event is set to [Remote].
Panel Load
*2
Can be specified only when the event is set to [Remote].
Alarm Display Reset
*1
You can specify this when the annunciator sequence is set to use
the “ISA-M” annunciator and the event is set to [Remote], [User
Key], or [Edge].
Comment Display
*1
Specify the comment text block number to display.
Favorite Display
*1
Choose which registered display to switch to.
Set [Action] to [Key] or [Select].
Settings Description
Key Performs the same operation as pressing the favorite
key.
Select Displays the specified favorite screen. Set the
registration numbers of the screens you want to specify
in the [No.] boxes.
*1 Available in release numbers 3 and later.
*2 Cannot be selected on DXs with the /AS1 advanced security option.
When the multi batch function (/BT2 option; release number 3 or later) is enabled,
specify the target batch group when you set the action to any of the settings below.
Settings that require the
designation of a specific batch
group Memory Start/Stop
Memory Start
Memory Stop
Math Reset
Save Display Data
Save Event Data
Message
Display Group Change
7.7 Setting DX1000/DX2000