Yokogawa DAQWORX - Manual (Page 71)

2-51 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Configuring the DAQLOGGER
Report Function
You can print out the report settings.
Procedure
1. In the DAQLOGGER Manager window, choose Other > Report > Print Setting.
2. Enter the settings, then press OK. The report settings are printed out. The report
pages for time, day, month, and week must be printed out separately.
Terminating the Report Configuration
Procedure
1. In the “DAQLOGGER Report” dialog box, click “OK” at the bottom of the window.
The setting are saved, and the dialog box closes.
Click “Cancel” to discard the settings and close the “DAQLOGGER Report” dialog
box.
Starting/Stopping the Report Function
Procedure
Starting the report function
1. In the menu bar of the “DAQLOGGER Manager” window, select “Others,” “Report,”
and then “Start.” The report function is started.
Stopping the report function
1. In the menu bar of the “DAQLOGGER Manager” window, select “Others,” “Report,”
and then “Stop.” The report function is stopped.
2.10 Configuring the Report Function