Yokogawa DAQWORX - Manual (Page 30)

2-10 IM WX101-01E
3. Type the password in the “New Password” and “Confirm” boxes then click “OK.”
Note
• A password must be within 16 characters. Any character is acceptable.
• Do not forget the password you set.
Canceling the use of password function
This operation does not clear the password already set. The password will take effect if
you specify its use again.
Procedure
1. In the menu bar of the “DAQLOGGER Manager” window, select “File” then “Project
Setting.” The “Project Setting” dialog box appears.
2. Click the check box of “Use Password Protection” to clear it; then click “OK.”
Changing the password
This operation changes the password already set.
Procedure
1. In the menu bar of the “DAQLOGGER Manager” window, select “File” then “Project
Setting.” The “Project Setting” dialog box appears (See the figure above).
2. Press the “Change...” button. The “New Password Setting” dialog box appears.
3. Type the password in the “New Password” and “Confirm” boxes then click “OK.”
Note
• A password must be within 16 characters. Any alphanumeric characters are acceptable.
• Do not forget the password you set.
2.5 Setting the Security