Yokogawa DAQWORX - Manual (Page 215)

7-39 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
Network
Setting the TCP/IP
Set the IP address
Enter the timeout value when turned ON
Set these addresses when using the DNS Select this tab
In the case of a CONFIG file, the IP address cannot be configured.
When communicating with the DX100/DX200/MV100/MV200 via Ethernet, the IP
address, subnet mask, and default gateway must be set on the DX100/DX200/MV100/
MV200 beforehand.
Setting the FTP
Select the file transfer destination Select this tab
By using the FTP function, you can automatically transfer the measured/computed data
files to the specified server.
7.6 Setting DX100, DX200, MV100, MV200