Trend monitor, Meter monitor – Yokogawa DAQWORX User Manual

Page 80

Advertising
background image

3-2

IM WX101-01E

Note

• You can open multiple monitor windows at the same time, but doing so may lower the PC’s

performance.

• When multiple monitor windows are displayed, the windows can be aligned. In the menu

bar, select “Window” then “Cascade” or “Tile.”

• Up to two alarm monitor screens can be displayed. Up to twelve screens of other monitors

can be displayed. If the number of displayed monitor screens exceeds the limit, you can

click the Monitor server button to display all screens in order from 1 to 12.

Trend Monitor

Link ON/OFF button

Display settings

Pause waveform

display

Save display settings

Alarm display ON/OFF button

Tag number/name display switch button

Zoom in/out of time axis

Waveform display zone buttons

Waveform display limit (clip) button

Cursor value display button

Clicking the

waveform zone

bar changes

the current

waveform.

Zone bar display

area
Tab for adjusting

grid brightness
Tab for adjusting

the brightness of

the waveform

display area

Waveform display

ON/OFF

Display zone

Time (absolute time) or

elapsed time (relative

time)

Alarm indicator Click this bar to show or

hide the display zone

bars

Drag this bar to adjust the width of

the waveform display area

(possible while the monitor is in

pause mode)

Red bar start blinking

when an alarm occurs

Select monitor

Select display group

Trip point 2

Trip point 1

Waveform display area

Auto Grouping

Meter Monitor

Link ON/OFF button

Display settings

Pause updating data

Save display settings

Alarm display ON/OFF button

Tag number/name display switch button

Select monitor

Red bar start blinking

when an alarm occurs

Select display group

Bar meter

Thermometer

Tag number

/name

Analog Meter

Alarm indicator

(Level1, 2, 3, 4

from the left)

Waveform

display color

Auto Grouping

3.1 Displaying Waveforms on the Monitor Window

Advertising
This manual is related to the following products: