Index – Yokogawa DAQWORX User Manual

Page 69

Advertising
background image

2-49

IM WX101-01E

1

2

3

4

5

6

7

8

9

Index

Configuring the DAQLOGGER

4. Specify the input source.

Select “Scan” or “Record.”

Scan : Use the data per scan interval.

Record : Use the data per record interval.

5. Specify the output destination.

Binary:

Outputs the report to a file in binary format (extension: .rbi). The report can

be viewed using Viewer.

Text:

Outputs the report to a text file in a tab-delimited format (extension: .txt). The

format is as follows.

The first line: Type, “REPORT,” date of generation, and start time of data

scanning or

recording

HOURLY REPORT Aug/20/1999 10:00:00 (START=Aug/20/1999 09:58:51)

The second line: Item names

NO TAG UNIT INSTANT MIN MAX AVERAGE SUM TOTAL

The third line and after: Data of individual tags

001 TAG-REC01-01 mV 173.2 -200.0 200.0 1.25667e+001 8.671000e+002 8.671000e+002

Print:

Outputs to the printer specified in the printer setting. Output format is the

same as that of the “Text.”

A print example is shown below.

Note

The output destination cannot be set only to “Print.”

2.10 Configuring the Report Function

Advertising
This manual is related to the following products: