Yokogawa DAQWORX - Manual (Page 466)

8-13 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Using DAQLOGGER Client Package
Setting the Display Conditions
Set up to 32 tags per group and register up to 50 groups.
1. Click “General Display Settings” on the toolbar or select “General Display Settings”
from the “File” menu. The “General Display Settings” dialog box opens.
Click the tab of the group to be configured
Turn ON/OFF waveform display (Blue is ON)
Turn ON/OFF at once
The waveform corresponding to the waveform No. that is clicked becomes active
Activate the settings and close the dialog box
Assign numbers to the tags in the selected range in ascending order
Register the tag
Show/Hide the Y-axis
Copy the settings of the first tag in the selected range to all other tags
Set the selected range at once
Initialize
Activate the settings
Copy the setup data of the
active waveform number
Select the items to be copied
Paste the copied setup
data to the active
waveform number
Enter the group name
Select normal display or exponential display
Select the type of meter monitor
Show/Hide the trip line
Enter the trip line
Enter the display position
Enter the display range
Display color
To select normal display or exponential display, carry out the following procedure. The
operating procedure of other items is the same as the “General Display Settings” dialog
box of the DAQLOGGER. See section 3.2.
Selecting normal display or exponential display of values
Click the button. The retrieved data are displayed in exponential form when “E” is
displayed.
Example: Normal display: 200.0, exponential display: 2.000E2
8.2 Monitoring the Data