Yokogawa DAQWORX - Manual (Page 357)

7-181 IM WX101-01E
1
2
3
4
5
6
7
8
9
Index
Setting the Recorder
Printing Settings (DR Only)
The following print setting can be made for DRs:
• Recording Mode (Trend or Logging)
• Trend Printing interval (Fixed or Automatic)
• Chart speed
• Chart speed 2
• Header
• Title
• List Format
Title settings
Choose list
printing items
Header settings
Recording
interval
Chartspeed 2
settings
Chart speed settings
Printing tab
Recording
modes
Recording Mode Settings
The following types of recording mode can be selected. The default is TREND.
• LOGGING (LOGGING MODE); measurement values will be printed out as digital
values.
• TREND (ANALOG TREND MODE); measurement values will be recorded as analog
trends (dot recording) and printed out as digital values.
• Selecting the recording interval
This setting can only be done for the TREND mode, and its default setting is AUTO.
FIX : Recording takes place at intervals equal to the measurement period (scan
interval). However, if the measuring period is 0.5 or 1 second, the recording interval is
fixed to 2 seconds. The measured data during the excess period is ignored.
AUTO : recording takes place at intervals automatically decided by measurement
interval and chart speed.
Chart Speed Settings
Chart Speed 1 (CHART)
This setting specifies the chart speed of ordinary trend recordings. The setting ranges
from 1 to 1500mm/h, in 1 mm steps. The default setting is 100mm/h.
7.9 Setting DARWIN