Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 102)

Publication 1760-UM002B-EN-P - March 2005
3-24 Commissioning
10. Press the OK button.
11. Use the up arrow button to select the start of the READ marker range.
12. Use the right arrow button to enter the upper limit of the READ range.
13. Use the up arrow button to select the value.
14. Confirm the entry with the OK button.
15. Use the down arrow button to enter the WRITE range.
16. Enter the WRITE range.
17. Press ESC to leave the entry menu.
The Serial Interface has now been set. No COM settings are required at
the remote station.
18. Press ESC to return to the Status display.
The entry in the second COM line indicates that the COM connection is
active.
READ:
1MD 00 Ç 1MD00
WRITE:
1MD00 Ç 1MD00
READ:
1MD11 Ç 1MD 14
WRITE:
1MD00 Ç 1MD00
READ:
1MD11 Ç 1MD14
WRITE:
1MD00 Ç 1MD00
READ:
1MD11 Ç 1MD14
WRITE:
1MD00 Ç 1MD00
READ:
1MD11 Ç 1MD14
WRITE:
1MD15 Ç 1MD17
BAUDRATE:19200B
Serial Interface
✓
REMOTE MARKER...
I 12.4.67.....
I COM P-
FR 02:02 ST
Q........ STOP