Entering network stations -16, Entering network stations – Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual User Manual
Page 94
Publication 1760-UM002B-EN-P - March 2005
3-16 Commissioning
Entering Network Stations
Only the network station at physical location 1 with station number 1 has a
station list.
1.
Use the up/down arrow keys to select the STATION menu and press
the OK button.
2.
Proceed to the station with physical address 2.
3.
Select the required physical location with the up/down arrow keys. Press
the OK button.
4.
Use up/down arrow keys to select station number 2.
5.
Press the OK button.
At physical location 2, the station has been assigned station address 2.
6.
Press ESC to return to the STATIONS menu item.
IMPORTANT
The left-hand column is the physical location. You
can only assign a physical location to unused station
numbers. Physical location 1 is permanently assigned
to station number 1.
1 1
▲
2 0
3 0
4
0
▼
1
1
▲
2 2
3 0
4
0
▼