Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 13)

1 Publication 1760-UM002B-EN-P - March 2005
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
• who should use this manual
• the purpose of this manual
• conventions used in this manual
• related documentation
Who Should Use this
Manual Use this manual if you are responsible for designing, installing, programming,
or troubleshooting automation control systems that use Allen-Bradley Pico
controllers.
Pico GFX-70 must only be installed and wired by trained electricians or other
persons familiar with the installation of electrical equipment.
You should have a basic understanding of electrical circuitry and familiarity
with relay logic. You should understand electronic process control and be able
to interpret the ladder logic instructions required to generate the electronic
signals that control your application.
If you do not, contact your local Allen-Bradley representative for the proper
training before using this product.
Purpose of this Manual This manual is a learning and reference guide for Pico GFX-70 controller. It
contains the information you need to install, wire, and configure the module. It
also provides diagnostic and troubleshooting information and programming
examples
Common Techniques Used
in this Manual The following conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not procedural steps.
• Numbered lists provide sequential steps or hierarchical information.
• Italic type is used for emphasis.
• Text in bold type indicates words or phrases you should type