Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 140)

Publication 1760-UM002B-EN-P - March 2005
4-30 Wiring with Pico GFX-70
The editor for inputting a function block is displayed.
4. Select the desired function block and number.
The functions of the individual function blocks are explained in the individual
function block descriptions on the following pages.
This display appears if there are function blocks present.
The function blocks are created in the sequence in which they were edited.
Calling up Function Blocks from the Circuit Diagram
If you enter a function block parameter from the circuit diagram, you will
jump from the circuit diagram editor to the function block editor
automatically. Once you have assigned the parameters, you will return to the
position where you left the circuit diagram with Save or Cancel. The operation
is carried out in the same way as with circuit diagram operation.
Example: timing relay function block
AR 01
L:001 B:7988
AR 01 ADD +
CP10 +
T 18 ?X -
L:001 B:6488
T 01 X? M:S +
>I1 20:30
>I2
QV>MD96
L:001 B:7808
Function block: Timing relay
Switch function: On-delayed with random switching
Time range: M:S (Minute:Seconds)
Set time >I1: 20 min 30 s
Actual time QV>: Copied to MD96