Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 79)

1 Publication 1760-UM002B-EN-P - March 2005
Chapter
3
Commissioning
Switching On Before startup check whether the power supply, inputs, outputs, the
serial interface and the Pico-Link cable are properly connected:
• 24V dc version:
– Terminal +24V: +24V voltage
– Terminal 0V: 0V voltage
– Terminals I1 to I12, R1 to R12:
Actuation via +24V
• 230V ac version
– Terminal L: Phase conductor L
– Terminal N: Neutral conductor N
– Terminals R1 to R12:
Actuation via phase conductor L
If you have already integrated devices into a system, secure any parts
of the system connected to the working area to prevent access and
ensure that no-one can be injured if, for example, motors start up
unexpectedly.
Setting the Menu Language When you switch on the Pico GFX-70 for the first time, you will be asked to
select the menu language.
1. Use the up and down arrow buttons to select the language
required.
– English
– German
– French
– Spanish
– Italian
– Portuguese
– Dutch
– Swedish
– Polish
– Turkish
ENGLISH ✓
DEUTSCH
FRANCAIS
ESPANOL