Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 333)

Publication 1760-UM002B-EN-P - March 2005
Pico GFX-70 Settings 7-5
You must unlock Pico GFX-70 with the password before you implement a
protected function, enter a protected menu or the System menu.
Unlocking Pico GFX-70
Unlocking Pico GFX-70 will deactivate the password. You can reactivate
password protection later via the password menu or by switching the power
supply off and on again.
1. Press OK to switch to the main menu.
The PASSWORD… entry will flash.
2. Press OK to enter the password entry menu.
Pico GFX-70 will display the password entry field.
3. Set the password using the cursor buttons.
4. Confirm with OK.
If the password is correct, Pico GFX-70 will return automatically to the
Status display.
The PROGRAM… menu option is now accessible so that you can edit your
circuit diagram.
The System menu is also accessible.
PASSWORD...
STOP RUN ✓
PASSWORD...
SET CLOCK...
IMPORTANT
If Pico GFX-70 shows PROGRAM… in the main
menu instead of PASSWORD…, this means that
there is no password protection active.
ENTER PASSWORD
XXXXXX
PROGRAM...
STOP
PARAMETERS
SET CLOCK...