Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 126)

Publication 1760-UM002B-EN-P - March 2005
4-16 Wiring with Pico GFX-70
• Connections are used to produce the electrical contact between relay
contacts and the coils. They can be created across several circuit
connections. Each point of intersection is a connection.
• The number of free bytes is displayed so that you can recognize how
much memory is available for the circuit diagram and function blocks.
Pico GFX-70 Circuit Diagram Display
For greater legibility, the circuit diagram display of the Pico GFX-70 shows
two contacts per circuit connection or one contact plus a coil in series. A total
of 16 characters per circuit connection and three circuit connections plus the
status line can be displayed simultaneously.
You can move between the contact fields with the left and right cursor
buttons. The number of the circuit connection and the contact are displayed in
the lower status line.
I 0 1-- --I 0 2-- --C P01 GT- --- --- -- [ Q 01
Q 0 1-- --H Y0 1Q1 -
|
❚❚❚❚❚❚ ❚❚❚❚❚❚ ❚❚❚❚❚❚ ❚❚❚❚❚❚ ❚❚❚❚❚❚
❚❚❚❚❚❚ ❚❚❚❚❚❚ ❚❚❚❚❚❚
L : 1 C :1 B: ___ _
Contact fields (1 t o 4) Coil field (5)
Connecting lines
Circuit
connections
Status line
Number of the
circuit
connection
Number of
the field in the
circuit
connection Amount of free
memory in bytes
I 01----I 02---
Q 01----HY01Q1-
|
L: 1 C:1 B:7840
IMPORTANT
The circuit diagram display performs two functions:
• In STOP mode it is used to edit the circuit diagram.
• In RUN mode it is used to check the circuit diagram
using the Power flow display.