Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 114)

Publication 1760-UM002B-EN-P - March 2005
4-4 Wiring with Pico GFX-70
Coils
Coils are the actuating mechanisms of relays. In RUN mode, the results of the
wiring are sent to the coils, which switch on or off accordingly. Coils can have
seven different coil functions.
Pico GFX-70 works with different contacts, which can be used in any order in
the contact fields of the circuit diagram.
Table 4.1 Usable Contacts
Contact Pico GFX-70 display
Make contact, open in release position I , Q , M , A , … .
Other contacts a Table
Break contact, closed in release position i , q , m , a , …
Other contacts a Table
Table 4.2 Contacts
Contact Make
contact Break
contact Number Page
Inputs
Inputs of a network station
* = Station address 1 to 8
*I *I 01 … 12 6-4
COM slave inputs 1I 1I 01..12
Pico GFX-70 input terminal I I 01 … 12 -
Cursor button P P 01 … 04 -
Network station expansion input
terminal
* = Station address 1 to 8
*R *R 01 … 12 6-4
Input terminal for expansion module
COM slave
1R 1R 01...12
Input terminal for expansion module R R 01 … 12 -
Bit inputs via the network
* = Station address 1 to 8
*RN *RN 01 … 32 6-4