Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 77)

Publication 1760-UM002B-EN-P - March 2005
Installation 2-43
Connecting the Serial Cable
1. Remove the interface cover.
2. Using a screwdriver, push on the terminal latch.
3. Insert each wire into its designated terminal on the interface connector.
4. Replace the interface cover.
Plug the other end of the cable into the Pico controller or I/O module.
X5
Cable Wire Color Code
green
X4 white
X3 yellow
X2 brown
X1 gray
1
X5
X4
X3
X2
X1
2 3
4
1760- RM... cable