Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 354)

Publication 1760-UM002B-EN-P - March 2005
7-26 Pico GFX-70 Settings
• CRC: 25825 (checksum of the operating system).
1. Switch to the System menu.
2. Select the SYSTEM menu.
3. Press the OK button.
4. Use the down arrow button to select the INFORMATION menu and
press OK.
This will display all device information.
Example: 1760-DUB, 1760-LDFC, 1760-IB12XOB4IOF
Example: 1760-DUB, 1760-LDF, 1760-IB12XOW4IF
Display in STOP mode.
Display in RUN mode.
The CRC checksum is not displayed.
5. Press ESC to leave the display.
IMPORTANT
If Pico GFX-70 is protected by a password, the
System menu will not be available until Pico GFX-70
is “unlocked” (see Unlocking Pico GFX-70 on page
7-5).
SECURITY
▲
SYSTEM...
MENU LANGUAGE
CONFIGURATOR...
▼
CARD MODE
▲
DISPLAY...
RETENTION...
INFORMATION...
▼
DC TCA LCD NET
OS : 1.11.111
CRC: 63163
DC RC LCD
OS : 1.11.111
CRC: 63163
DC RC LCD
OS : 1.11.111
CRC: - - -
CARD MODE
▲
DISPLAY...
RETENTION...
INFORMATION...
▼