Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 90)

Publication 1760-UM002B-EN-P - March 2005
3-12 Commissioning
Use the arrow keys to move between the contacts or coil.
2. Press the up cursor button.
The cursor moves to the second contact.
3. Press the ALT button. The display changes to display status with contact
and/or coil designation.
Figure 3.9 Power flow display: Input I1 is closed, input I2 is open, relay Q1 has
dropped out
= visible area
❚==#--------[#
L: 002 I 02
I 01====I 02-------------------[ Q 01
L: 1 C:2 RUN