Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 167)

Publication 1760-UM002B-EN-P - March 2005
Wiring with Pico GFX-70 4-57
Example:
Initializing marker blocks, specifying marker ranges directly
The value of marker byte 10 is to be transferred to marker bytes 20 to 29.
Parameters of BT01 function block:
Source range:
>I1 MB10
Destination range:
>I2 MB20
Number of bytes:
>NO 10
After a rising edge from 0 to 1 at coil BT01T_ the value 123 is present in the
marker bytes MB20 to MB29.
Example:
Initial is at ion of marker blocks, definition of a range with offset
The content of marker byte MB15 is to be transferred to marker bytes MB65
to MB68.
Source range Value of source
marker range
(decimal) Destination range Value of
destination
marker range
(decimal)
MB10 123 MB20 123
MB21 123
MB22 123
MB23 123
MB24 123
MB25 123
MB26 123
MB27 123
MB28 123
MB29 123