Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 17)

Publication 1760-UM002B-EN-P - March 2005
Overview 1-3
– preset
– frequency counters
– high-speed counters
– count incremental encoder values
• compare values
• display graphics, texts, variables, enter set points, display flashing values
and graphics, change and replace graphics and texts by push button
• process additional inputs and outputs
• use 7-day and year time switches
• count operating hours (operating hours counter)
• communicate via the Pico-Link
• set up point-to-point communication via the serial interface
• provide closed-loop control with P, PI and PID controllers
• scale arithmetic values
• output manipulated variables as pulse-width modulated signals
• run arithmetic functions:
– add
– subtract
– multiply
– divide
• track the flow of current in the circuit diagram
• load, save and password-protect circuit diagrams
If you prefer to wire up the Pico GFX-70 from a PC, then use Pico Soft Pro.
Pico Soft Pro allows you to create and test your circuit diagram on the PC. All
display and operator functions on the device are created exclusively using the
Pico Soft Pro software. Pico Soft Pro is also used to print out your circuit
diagram in DIN, ANSI or ladder format.