Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 241)

Publication 1760-UM002B-EN-P - March 2005
Wiring with Pico GFX-70 4-131
Parameter display and parameter set for the PUT function block:
Input
The function block input
>I1
can be assigned the following operands:
• Constants
• Markers MD, MW, MB
• Analog inputs IA01 to IA04
– IA01: terminal I7
– IA02: terminal I8
– IA03: terminal I11
– IA04: terminal I12
• Analog output QA01
• Actual value
… QV> of another function block
Contacts
PT01Q1 to PT32Q1: state of the trigger coil
Coils
PT01T to PT32T: trigger coils
Memory Requirement of the PUT Function Block
The PUT function block requires 36 bytes of memory plus 4 bytes per
constant on the function block input.
PUT Diagnostics
The PUT function block only functions when the Pico-Link network is
functioning correctly (see Signs of Life of the Individual Stations and Diagnostics on
page
6-12).
PT01 11 -
>I1
PT01 PUT function block (places a value onto the network), number 11
- Does not appear in the parameter display
>I1 Setpoint value which is put onto the Pico-Link network