Connecting the serial interface, Connecting the serial interface -38 – Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual User Manual
Page 72
Advertising
Publication 1760-UM002B-EN-P - March 2005
2-38 Installation
Connecting the Serial
Interface
The GFX processor unit is provided with a multi-function interface. This can
be used to set up point-to-point communication between different devices.
The interface is also used for connecting PicoSoft Pro.
The serial interface must be implemented using special cables.
The standard 1760-CBL-2M cable is 2m in length.
1.
Remove the interface cover or other plugs from the interface.
2.
Fit the connectors in the devices.
IMPORTANT
The 1760-CBL-2M cable must not be lengthened in order
ensure compliance with EMC requirements.
Advertising