Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 276)

Publication 1760-UM002B-EN-P - March 2005
5-8 Visualization with Pico GFX-70
Static Text Example Program 2 – Different Display Formats with Password Request
for One Screen
The program consists of four screens in which the static text is displayed in
different ways. The fourth screen contains a password request. The individual
screens can be selected with up and down cursor buttons. The screen change
was defined in the Button editor (see Button Editor on page 5-37).
The defined password is requested when exiting screen 4. In this case, it is the
number 2 which has to be confirmed with OK. Further scrolling through the
screens cannot be done without entering the correct password. You can leave
the password request by pressing ESC, which, however, will only move you
back to the previous screen.
Standard path: C:\Program Files\PicoSoft 6 Pro\samples\
Program: stat.text_manual screen change with password.e60
Screen 1 - Screen 1 displays a static text in normal font size.
Screen 2 - Screen 2 displays a static text enlarged.
Screen 3 - Screen 3 shows three static texts in different font sizes.
Screen 4 - Screen 4 shows four static texts arranged in rows.
Static Text Example Program 3 – Different Display Formats with Screen Activation
via a Counter
The program consists of four screens in which the static text is displayed in
different ways. The individual screens are activated via counter C01. The
counter's SH upper switch value is 5. The activation pulse for activating the
screens is supplied by timing relay T01. This generates the counter values 0 to
5. Screen 1 is activated with counter value 1, screen 2 with counter value 2 etc.
Once the counter's upper switch value has been reached, timing relay T02 is
started which resets the counter. This therefore produces a continuous loop.
Timing relay T02 provides a reset delay for the counter.
Standard path: C:\Program Files\PicoSoft 6 Pro\samples\
Program: stat.text_automatic screen change.e60
Screen 1 - Screen 1 displays a static text in normal font size.
Screen 2 - Screen 2 displays a static text enlarged.
Screen 3 - Screen 3 shows three static texts in different font sizes.
Screen 4 - Screen 4 shows four static texts arranged in rows.
Four
static texts
arranged
in rows!!