Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 397)

Publication 1760-UM002B-EN-P - March 2005
Index 3
Introduction to Serial Interface 6-16
Station message types 6-11
Station signs of life 6-12
Topology 6-3, 6-16
Transfer behaviour 6-11
Transmission security 6-15
Network cables 2-36
O
Operating principles 1-8
Output relay 4-18
Overload 2-31, 8-7
Monitoring 8-7
P
P buttons 4-26
Activating and deactivating 7-15
Parameter display
Counter relay 4-80, 4-86
Timing relay 4-76
Parameters
Change 7-9
Display 7-9
Inhibit access 7-9
Password
Activation 7-4
Change 7-6
Deleting 7-6
Protection removal 7-7
Setup 7-2
Pause time 6-8
Power failure 3-2
Power flow display 3-10, 3-11, 4-27
Product Description 1-4
Program 8-1
Cycle 8-1
Load 8-10
Saving 8-10
publications, related P-2
Purpose of this Manual P-1
R
related publications P-2
Relay coil
Change 4-18
Coil function 4-19, 4-33
Deleting 4-21
Entering 3-8, 4-18
Relays
Connecting the outputs 2-28
Overview 4-9, 4-12, 4-15
Removing
Inputs/outputs 2-11
Processor unit 2-12
Reset 4-35
Retention
Setting behaviour 7-23
Transferring behaviour 7-24
Retention requirements 7-23
Retentive behaviour 7-24
On circuit diagram transfer 7-25
Setting 7-23
RUN, start behaviour 3-2
RUN/STOP changeover 3-10
S
Screw mounting 2-14
Sealing the protective cover 2-5
Sensor (20 mA) connection 2-26
Serial Interface 6-16
Activation 6-19
Baud rate 6-19
Configuration 6-18
Data access 6-17, 8-2
Operating principle 6-20
Sign of life detection 6-20
Serial interface 2-38
Set 4-35
Setpoint potentiometer 2-26
Setpoints 2-33, 4-39, 7-10
Setting LCD backlight 7-20
Setting LCD contrast 7-20
Setting the LCD 7-20
Setting the time 7-11
Short-circuit 2-31, 8-7
Monitoring with 1760-IB12XOB8 8-7
Startup behaviour 7-16, 7-18
After the circuit diagram is deleted 7-17
Basic setting 7-17, 7-19, 7-20, 7-21
Possible faults 7-18
Setting 7-16
With upload/download to module or PC
7-17
Station
Active 6-16
Remote 6-16
Status image register 8-2
Suppressing contact bounce 8-5
Switching contact 4-21
Change 4-18
Contact name 4-18