Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 295)

Publication 1760-UM002B-EN-P - March 2005
Visualization with Pico GFX-70 5-27
Number range/format tab - The Number range/format tab is used for
defining the following:
• Value range
• Unit of measure
• Scaling range
• Input format
The display of the value sign can be forced.
Visibility tab - The Visibility tab enables you to make the screen element
invisible via an associated variable.
Operability tab - In the Operability tab, select the associated variable for
disabling the entry element.
Value Entry Example Program
The program consists of seven screens that can be selected using the up and
down cursor buttons. The screen change was defined in the Button editor (see
Button Editor on page 5-37). When the Pico GFX-70 is in RUN mode, you
can change values that are processed in the program by using the up/down
and left/right cursor buttons. The Pico GFX-70 shows the actual values in the
display.
In order to change values, the Pico GFX-70 must first switch to Selection
mode. In Selection mode you can select the value entry element containing the
values you wish to change.
1. Press OK to switch the Pico GFX-70 to Selection mode. Use ESC to
exit Selection mode.
The selected value entry element will flash. If several value entry
elements are present, use the up/down and left/right cursor buttons to
select the required element (see Screen 7).
2. Press the OK button to move from Selection mode to Entry mode.
3. Move to the required position using the left and right cursor buttons,
change the value with the up and down cursor buttons.
4. Accept the modified value by pressing OK. Press ESC if you wish to
retain the previous value.
In both cases you return to Selection mode and can exit by pressing
ESC.