Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 135)

Publication 1760-UM002B-EN-P - March 2005
Wiring with Pico GFX-70 4-25
The device will search for the first occurrence of the contact or coil from the
start of the search to the end of the circuit diagram. If no contact or coil is
found, the Pico GFX-70 circuit diagram editor will continue the search from
the start of the circuit diagram. If a contact or coil is found, the Pico GFX-70
editor automatically jumps to the respective field in the circuit diagram.
“Go To” a Circuit Connection
The Pico GFX-70 circuit diagram editor provides a Go To function to enable
fast access to a circuit connection.
1. Press ESC and use the arrow keys to select the GO TO menu.
2. Press OK.
3. Select the required circuit connection (L... … ).
The first contact on the circuit connection is always indicated.
4. Press OK.
The cursor remains stationary at the required circuit connection contact
L 1.
Deleting the Circuit Connection
Pico GFX-70 only removes empty circuit connections (without contacts or
coils).
1. Delete all the contacts and coils from the circuit connection.
2. Position the cursor on the first contact field of the empty circuit
connection.
3. Press DEL.
I 01----I 02---
Q 01----HY01Q1- |
L: 1 C:1 B:7140
I 01----I 02---
Q 01----HY01Q1-
|
L: 1 C:1 B:7140
I 01----I 02---
Q 01----HY01Q1-
|
L: 1 C:1 B:7140