Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 75)

Publication 1760-UM002B-EN-P - March 2005
Installation 2-41
Remote Expansion
Expansion I/O modules can be located remotely from the primary controller
by using the Pico-Link or serial interface. See Configuring a Pico-Link Network on
page 3-14 and Configuring the Connection for the Terminal Mode on page 3-20 for
more information.
Installing the Remote
Processor The remote processor is used for terminal mode operation of Pico controllers
and I/O modules. The remote processor is used with either a Display or
Display/Keypad Unit.
Figure 2.49 Remote Processor Terminal Operation
Mounting and Removal
Flush Mounting
Figure 2.50 Flush Mounting Display and Remote Processor
1. Insert the display unit through the mounting holes on the panel.
1760-LDF...
1760-RM-GFX
1
2
3
M = 1.2 – 2 Nm
10.6 - 17.7 lb-in
2