Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 270)

Publication 1760-UM002B-EN-P - March 2005
5-2 Visualization with Pico GFX-70
Memory Division
Figure 5.1 Memory division Pico GFX-70
The maximum size of the program memory is 8 KByte. This memory area is
used to store the circuit diagram and also reserves enough space for displaying
the largest screen.
The screen memory has a total memory capacity of 24 KByte, which is used in
this memory area to store all the screens created.
It should therefore be ensured that screens have the lowest possible memory
requirement so that enough space is available in the program memory for the
largest screen and the circuit diagram. If a circuit diagram is not required, the
memory requirement of the largest screen must not exceed the 8 KByte limit.
Figure 5.2 Status Bar Location
TIP
The PicoSoft Pro status bar indicates the available memory,
the available screen memory and the required memory for
the active screen element. If the available memory is
exceeded the indicator will turn red.
Program memory
Circuit
diagram
Screen 4
Screen 4
Screen 1
Screen 2
Screen 3
Screen 5
Screen memory
8 K
B
24 KB
Status Bar