Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 108)

Publication 1760-UM002B-EN-P - March 2005
3-30 Commissioning
5. Select the second station. This station will control the display and
respond to the keypad.
6. Press the OK button.
Select your station.
1. Press the Up or Down Arrow button.
2. Press the OK button.
Select the START MODE menu option.
1. Press the Down Arrow button.
2. Press the OK button.
In this case Pico-Link station 2 is connected.
The GFX tries to establish connection to the selected device. The text flashes.
Once the connection is established, the menu appears or the Status display in
which the selected device is active.
STATION ID: 0
START MODE
IMPORTANT
Station ID:
0 = Station at the point-to-point serial interface
1 = Pico-Link Station 1
2 = Pico-Link Station 2
3 = Pico-Link Station 3
4 = Pico-Link Station 4
5 = Pico-Link Station 5
6 = Pico-Link Station 6
7 = Pico-Link Station 7
8 = Pico-Link Station 8
STATION ID: 0
START MODE
STATION ID: 0
START MODE
STATION ID: 2
START MODE
Connection
establishment
in progress.. .