Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 204)

Publication 1760-UM002B-EN-P - March 2005
4-94 Wiring with Pico GFX-70
– IA03: terminal I11
– IA04: terminal I12
• Analog output QA01
• Actual value
… QV> of another function block
Output
The function block output QV> can be assigned the following operands:
• Markers MD, MW, MB
• Analog output QA01
Contacts
DB01Q1 to DB32Q1
Contact (make contact) DB..Q1 switches to status 1 if the trigger signal is set
to 1.
Coils
DB01T_ to DB32T_, acceptance of the value at >I1 with a rising edge.
Memory Requirement of the Data Function Block
The data block function block requires 36 bytes of memory plus 4 bytes per
constant at the function block input.
Retention
Data function blocks can be operated with retentive actual values. The quantity
can be selected in the SYSTEM
→ RETENTION menu.