Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 345)

Publication 1760-UM002B-EN-P - March 2005
Pico GFX-70 Settings 7-17
Activating RUN Mode
If Pico GFX-70 displays
RUN MODE ✓
, this means that Pico GFX-70 will start
in Run mode when the supply voltage is applied.
1. Otherwise select RUN MODE and press OK.
RUN mode is activated.
2. Press ESC to return to the Status display.
Deactivating RUN Mode
1. Select
RUN MODE
✓ .
2. Press OK.
The RUN mode function is deactivated.
The default setting for Pico GFX-70 is for RUN MODE to be displayed. In
other words, Pico GFX-70 starts in
RUN MODE
✓ when the power is switched
on.
Behavior When the Circuit Diagram is Deleted
The setting for the startup behavior is a Pico GFX-70 device function. When
the circuit diagram is deleted, this does not result in the loss of the setting
selected.
Behavior During Upload/Download to Module or PC
When a valid circuit diagram is transferred from Pico GFX-70 to a memory
module or the PC or vice versa, the setting is still retained.
DEBOUNCE
✓ ▲
P BUTTONS
RUN MODE
✓
CARD MODE
▼
DEBOUNCE
✓ ▲
P BUTTONS
RUN MODE
CARD MODE
▼
Startup behavior Menu display Status of Pico GFX-70
after startup
Pico GFX-70 starts in STOP
mode RUN MODE Pico GFX-70 is in STOP mode
Pico GFX-70 starts in RUN
mode RUN MODE ✓ Pico GFX-70 is in RUN mode
IMPORTANT
The GFX models without a display can only be started in
RUN mode.