Entering the network station number -15, Entering the network station number, The following tasks are only possible in stop mode – Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual User Manual
Page 93
Publication 1760-UM002B-EN-P - March 2005
Commissioning 3-15
3.
Proceed to the first physical station (Location 1). This station has the
termination resistor inserted on socket 1.
Entering the Network Station Number
1.
Simultaneously press the DEL and ALT buttons while the GFX displays
the Status display.
The System menu appears
2.
Select the CONFIGURATOR menu option.
3.
Press the OK button.
The NET menu appears.
4.
Press the OK button.
The NET PARAMETERS… menu appears.
5.
Press the OK button.
6.
Press the OK button and select the station number using the up/down
arrows keys. In this case the station number (Pico-Link ID) “01”.
7.
Press the OK button.
8.
Exit the NET PARAMETERS menu with ESC.
IMPORTANT
The following tasks are only possible in STOP mode.
SECURITY...
SYSTEM...
MENU LANGUAGE
CONFIGURATOR...
NET..
COM...
LINK....
NET PARAMETERS...
STATIONS...
CONFIGURE
NET-ID : 00
▲
BAUDRATE: 125KB
BUSDELAY: 00
SEND IO
✓
▼
REMOTE RUN
REMOTE IO
NET-ID : 01
▲
BAUDRATE: 125KB
BUSDELAY: 00
SEND IO
✓
▼
REMOTE RUN
REMOTE IO
IMPORTANT
The station designated station number 1 is the active
station. For this reason the REMOTE RUN and
REMOTE IO functions are not available.