Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 121)

Publication 1760-UM002B-EN-P - March 2005
Wiring with Pico GFX-70 4-11
The switching behavior of these relays is set by the coil functions and
parameters selected.
Get from network station function
block GT X=01 … 32 -
✓
Seven-day time switch HW X=01 … 32 - ✓
Year time switch function block HY X=01 … 32 -
✓
Activate value scaling function block LS X EN X=01 … 32 ✓ ✓
Master reset function block MR X T_ X=01 … 32
✓ ✓
Activate numerical converter
function block NC X EN X=01 32 ✓ ✓
Function block operating hours
counter, enable OT X EN X=01 … 04
✓ ✓
Operating hours counter function
block, reset OT X RE X=01 … 04
✓ ✓
Send to the Pico-Link network
function block, trigger PT X T_ X=01 … 32 ✓ ✓
Activate pulse width modulation
function block PW X EN X=01 … 02
✓ ✓
Send time to the Pico-Link network
function block, trigger SC X T_ X=01
✓
-
Activate set cycle time function block ST X EN X=01
Timing relay function block, trigger
control coil (enable) T X EN X=01 … 32
✓ ✓
Timing relay function block, stop T X ST X=01 … 32 ✓ ✓
Timing relay function block, reset T X RE X=01 … 32
✓ ✓
Activate value limitation function
block VC X EN X=01 … 32 ✓ ✓
Table 4.3 Usable Relays and Function Blocks (Coils)
Relay/function block Pico
GFX-70
display Number Coil Parameter