Password logout, Set variable to fixed value, Increment variable – Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual User Manual
Page 306: Decrement variable, Changeover relay
Advertising
Publication 1760-UM002B-EN-P - March 2005
5-38 Visualization with Pico GFX-70
button function you must assign a screen change button element to an
operator button in each of these screens.
Password Logout
The Screen overview contains the Passwords tab for defining a logout time.
This logout time is skipped with the Password logout function.
Set Variable to Fixed Value
This function assigns a fixed value to the selected variable, such as for resetting
to a defined value.
Increment Variable
The variable value is increased by the set step width.
Decrement Variable
The variable value is decreased by the set step width.
Changeover Relay
The state of a variable or a function block input is negated.
Advertising