Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual User Manual
Page 311
Publication 1760-UM002B-EN-P - March 2005
Pico-Link and Point-to-Point Serial Connections 6-5
Example 1
Station 1 is to read the input I1 of station 2 and write to output Q1 of station
2. Station 2 does not have a circuit diagram.
Figure 6.1 Circuit diagram in station 1
Example 2:
Marker M 01 of station 4 is to switch the output Q1 of station 3 via the
network. Both stations have a circuit diagram.
Figure 6.2 Circuit diagram in station 4: Set coil 01 in station 3
Figure 6.3 Circuit diagram in station 3: Get value from coil 01 in station 4
IMPORTANT
Every station with a circuit diagram has read access
to the physical station inputs and outputs of other
stations and can process them locally.
2I 01-----------------------------[2Q
01
M 01-----------------------------[3SN
01
4RN 01-----------------------------[ Q
01