Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 51)

Publication 1760-UM002B-EN-P - March 2005
Installation 2-17
Connecting the Power
Supply
1760-IA12XOW6I Expansion Units
Figure 2.17 Power supply on the AC expansion units
TIP
The required connection data for both device types GFX,
1760-IB12XOB8 with 24V dc and 1760-IA12XOW6I with
standard voltages of 100V ac to 240V ac are shown on page
A-1.
The Pico GFX-70 devices run a system test for one second
after the power supply has been switched on. Either RUN
or STOP mode will be activated after this time depending
on the default setting.
ATTENTION
A short current surge will be produced when switching on
for the first time. Do not switch on the module via Reed
contacts since these may burn or melt.
N N L
N
F1
L
100-240 V ~
E+ E- R1 ... R12