Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual User Manual
Page 231
![background image](/manuals/579694/231/background.png)
Publication 1760-UM002B-EN-P - March 2005
Wiring with Pico GFX-70 4-121
Power Flow Display
Jumped ranges are indicated by the coils in the power flow display.
All coils after the jump coil are shown with the symbol of the jump coil.
Example
A selector switch allows two different sequences to be set.
• Sequence 1: Switch on Motor 1 immediately.
• Sequence 2: Switch on Guard 2, Wait time, then switch on Motor 1.
Contacts and relays used:
• I1 Sequence 1
• I2 Sequence 2
• I3 Guard 2 moved out
• I12 Motor-protective circuit-breaker switched on
• Q1 Motor 1
• Q2 Guard 2
•
T 01
Wait time 30.00 s, on-delayed
•
D 01
Text “motor-protective circuit-breaker tripped”
ATTENTION
If circuit connections are skipped, the states of the coils are
retained. The time value of timing relays that have been
started will continue to run