Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 50)

Publication 1760-UM002B-EN-P - March 2005
2-16 Installation
Connecting the Expansion
Unit You can only add one Pico expansion I/O module to each controller.
Figure 2.16 Connecting expansion units
Terminals Tool for Cage Clamp Terminals
Slot-head screwdriver, width 3.5 mm x 0.6 mm.
Connection Cross-Sections of the Cage Clamp Terminal Cables
• Solid: 0.2 to 4 mm 2
(AWG 24 -12)
• Flexible with ferrule: 0.2 to 2.5 mm 2
(AWG 24-12)
Tool for Slot-Head Screws for Expansion I/O Unit
Slot-head screwdriver, width 3.5 x 0.6 mm, tightening torque 0.6 Nm.
Connection Cross-Sections of Screw Terminal Cables
• Solid: 0.2 to 4 mm 2
(AWG 22 - 12)
• Flexible with ferrule: 0.2 to 2.5 mm 2
(AWG 22 -12)