Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 368)

Publication 1760-UM002B-EN-P - March 2005
8-14 Inside Pico GFX-70
Loading a Circuit Diagram from the Memory Module
1. Select the CARD-> DEVICE menu option.
2. Press OK to confirm the prompt if you want to delete the Pico GFX-70
memory and replace it with the memory module content.
3. Press ESC to cancel.
If there are transmission problems, Pico GFX-70 will display the INVALID
PROG message.
This means that either the memory module is empty or that the circuit diagram
on the memory module contains function relays that Pico GFX-70 does not
recognize.
The analog value comparator function block is only available on 24V dc
versions of Pico GFX-70. Programs with visualization components are only
supported by the GFX.
Deleting a Circuit Diagram on the Memory Module
1. Select the DELETE CARD menu option.
2. Press OK to confirm the prompt and to delete the memory module
content.
3. Press ESC to cancel.
Memory Module Compatibility of the Programs
DEVICE-CARD
CARD-DEVICE
DELETE CARD
INVALID PROG
IMPORTANT
If the memory module is password-protected, the password
will also be transferred to the Pico GFX-70 memory and
will be active immediately.
DELETE ?
IMPORTANT
Memory modules with programs are always read by Pico
GFX-70 devices with the newer (higher) operating system
version. The program is executable. If programs are written
with a newer operating system (higher number) on the
memory module, this program can only be read and
executed by the same version or a higher one.