Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 268)

Publication 1760-UM002B-EN-P - March 2005
4-158 Wiring with Pico GFX-70
Doubling the flashing frequency:
1. Select the power flow display
T 01
and change the constant of the
setpoint time to
001.000
.
When you press OK, the warning light will flash at twice the frequency.
On the display
EN
indicates that the enable coil is actuated.
Setpoint value settings with constants can be modified via the PARAMETERS
menu.
T 01 Ü S +
>I1 00 1 .000
>I2
QV> 0.550
.. EN..
IMPORTANT
The actual value is only displayed in RUN mode. Call up
the parameter display for this via the power flow display or
PARAMETERS menu.