Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 133)

Publication 1760-UM002B-EN-P - March 2005
Wiring with Pico GFX-70 4-23
If several circuit connections are connected to one another, Pico
GFX-70 first deletes the vertical connection. If you press DEL again, it
will delete the horizontal connection as well.
3. Close the delete operation with ALT or by moving the cursor to a
contact or coil field.
Inserting and Deleting a Circuit Connection
The Pico GFX-70 circuit diagram display shows three of the 256 circuit
connections on the display at the same time. Pico GFX-70 automatically
scrolls up or down the display to show hidden circuit connections - even
empty ones - if you move the cursor past the top or bottom of the display.
A new circuit connection is added below the last connection or inserted above
the cursor position:
1. Position the cursor on the first contact field of a circuit connection.
2. Press ALT.
The existing circuit connection with all its additional connections is “shifted”
downwards. The cursor is then positioned directly in the new circuit
connection.
Figure 4.10 Inserting a new circuit connection
IMPORTANT
You cannot delete connections that Pico GFX-70 has
created automatically.
I 02-- | ------
I 03-- |
I 02-- | -------
|
I 03-- |