Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 39)

Publication 1760-UM002B-EN-P - March 2005
Installation 2-5
Figure 2.6 Installing the protective cover
Install the protective cover as shown in the figure.
Sealing the Protective Cover
Figure 2.7 Sealing the protective cover
The grip handle of the protective cover is provided with holes that can be used
in any mounting position. You can fit a wire or similar material through these
holes in order to seal the cover. If the wire is provided with a lead seal, the
cover is sealed. The cover can then only be opened by breaking the seal or the
wire.