Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 349)

Publication 1760-UM002B-EN-P - March 2005
Pico GFX-70 Settings 7-21
2. Select the
SYSTEM
menu.
3. Press the OK button.
4. Use the down arrow button to select the DISPLAY menu and press
OK .
The menus for setting the contrast and backlight are displayed.
5. Press the OK button and move to the contrast entry field
Use the up and down arrow buttons to set the contrast to a value
between -2 and +2.
6. Select your setting.
7. Complete your setting by pressing OK.
The contrast setting will be retained until it is modified.
8. Use the up and down arrow buttons to move to the LIGHTING menu.
9. Press the OK button.
10. Use the up and down arrow buttons to change the value in 25% steps.
11. Set the required backlighting.
.
SECURITY
▲
SYSTEM...
MENU LANGUAGE
CONFIGURATOR...
▼
RUN MODE
▲
CARD MODE
TERMINAL MODE
DISPLAY...
▼
CONTRAST: 0
LIGHTING: 75%
CONTRAST: +1
LIGHTING: 75%
CONTRAST: +1
LIGHTING: 75%
CONTRAST: +1
LIGHTING: 75%
CONTRAST: +1
LIGHTING 75%
IMPORTANT
The backlight will immediately change to the set value. 0,
25, 50, 75 and 100% are possible values.
CONTRAST: +1
LIGHTING 100% IMPORTANT
Pico GFX-70 comes with the following factory setting:
The contrast is set to 0.
The backlight is set to 75%.