Rockwell Automation 2364F Regenerative DC Bus Supply Unit (RGU) - Manual (Page 109)

Publication 2364F-5.01– October 2003
Interpreting and Setting Status, Command, and Fault Words 10-3
Host Processor Information RGU host processor information is made available via command,
status, and mode words as follows:
Use the following table to interpret bit settings:
The items that correspond to each bit are identified in Table 10.2.
Word Name Parameter Number Type of Information Provided
Host Processor Command Word 32 RGU command selection, see Table 10.B
Host Processor Status Word 1 33 Present conditions and status of operation.
Host Processor Status Word 2 34 Present conditions and status of operation.
Host Processor Mode Word 35 Specific information on operating modes, see
Table 10.B
Parameter Type A Bit Set to “0” Means: A Bit Set to “1” Means:
Command Word Specific command is not executed. Specific command is executed.
Status Word Condition is false. Condition is true.
Mode Word Mode is disabled. Mode is enabled.