Rockwell Automation 2364F Regenerative DC Bus Supply Unit (RGU) - Manual (Page 128)

Publication 2364F-5.01– October 2003
12-10 Setting Up Trending
Looking at the Output When the trend output is linked to the analog output and a chart
recorder is then connected to the analog output, you can view the
trend output. To locate the starting point of a trend, look for a
negative spike followed by a positive spike. These spikes are added to
indicate the oldest piece of sampled data.
If you want to look at the current data, you can read the real time
trend sample data using:
• the DriveTrending portion of the DriveTools software
• a GPT